COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Large Wheel Loaders
990K
ADD MODEL
ADD MODEL
Rated Payload - Loose Material (Standard)
20 ton (US)
Na
Na
Rated Payload - Loose Material (High Lift)
22 ton (US)
Na
Na
Rated Payload - Standard (Quarry Face)
17.5 ton (US)
Na
Na
Rated Payload - High Lift (Quarry Face)
17.5 ton (US)
Na
Na
Bucket Capacity Range
8,6 m³ – 10,0 m³ (11,25 yd³ – 13,0 yd³)
Na
Na
Cat Truck Match - Standard
773-775
Na
Na
Cat Truck Match - High Lift
775-777
Na
Na
Operating Weight
178517 lb
Na
Na
Net Power
699 HP
Na
Na
Engine Model
C27 Cat®
Na
Na
Bore
5.4 in
Na
Na
Stroke
6 in
Na
Na
Displacement
1649.5 in³
Na
Na
Torque Rise
18 %
Na
Na
Rated Speed
1,800/min
Na
Na
Rated Speed - Net Power - SAE J1349 - Standard Ambient
699 HP
Na
Na
Rated Speed - Net Power - SAE J1349 - High Ambient
648 HP
Na
Na
Rated Speed - Gross - SAE J1995
766 HP
Na
Na
Net Power - SAE J1349
699 HP
Na
Na
Emissions
U.S. EPA Tier 4 Final OR Tier 2 Equivalent
Na
Na
Rated Speed - Gross - ISO 14396
752 HP
Na
Na
Gross - ISO 14396
752 HP
Na
Na
Peak Torque - 1,200 rpm
2624 lb/ft
Na
Na
Bucket Capacities
7,4-14,9 m³ (9,7-19,5 yd³)
Na
Na
Transmission Type
Cat-Planetenlastschaltgetriebe
Na
Na
Forward - 1
4.5 mile/h
Na
Na
Forward - 2
8.3 mile/h
Na
Na
Forward - 3
14.2 mile/h
Na
Na
Reverse - 1
4.9 mile/h
Na
Na
Reverse - 2
9.1 mile/h
Na
Na
Reverse - 3
15.5 mile/h
Na
Na
Direct Drive - Forward 1
Lock-up disabled
Na
Na
Direct Drive - Forward 2
8.5 mile/h
Na
Na
Direct Drive - Forward 3
15.2 mile/h
Na
Na
Direct Drive - Reverse 1
5.4 mile/h
Na
Na
Direct Drive - Reverse 2
9.6 mile/h
Na
Na
Direct Drive - Reverse 3
16.4 mile/h
Na
Na
Note
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO‑ULS™ or oils that meet the Cat ECF-3, API CJ‑4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf.
Na
Na
Front
Fixed
Na
Na
Rear
Trunnion
Na
Na
Oscillation Angle
8.5°
Na
Na
Raise
8.2 s
Na
Na
Dump
2.9 s
Na
Na
Lower Float Down
3.6 s
Na
Na
Lower
3.7 s
Na
Na
Total Hydraulic Cycle Time - Empty Bucket
13.8 s
Na
Na
Rack Back
4.3 s
Na
Na
Fuel Tank
294.3 gal (US)
Na
Na
Cooling System
54.9 gal (US)
Na
Na
Transmission
29.1 gal (US)
Na
Na
Hydraulic Tank - Implement and Hydraulic Fan
68.9 gal (US)
Na
Na
Differential - Final Drives - Rear
68.9 gal (US)
Na
Na
Differential - Final Drives - Front
71.6 gal (US)
Na
Na
Hydraulic Tank - Steering and Braking
34.9 gal (US)
Na
Na
Engine Crankcase
20 gal (US)
Na
Na
Hydraulic System Factory Fill
210 gal (US)
Na
Na
Pilot System
Open loop and pressure reducing
Na
Na
Maximum Flow at 1,800 rpm (1)
216 gal/min
Na
Na
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Na
Na
Relief Valve Setting - Lift/Tilt
4786 psi
Na
Na
Maximum Flow at 1,800 rpm (2)
22.2 gal/min
Na
Na
Relief Valve Setting - Main
507 psi
Na
Na
Lift/Tilt System - Circuit
Positive flow control
Na
Na
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Na
Na
Lift/Tilt System
Variable displacement piston
Na
Na
Operator Sound Level (ISO 6396:2008)
69 dB(A)
Na
Na
Machine Sound Level (ISO 6395:2008)
115 dB(A)
Na
Na
Total Steering Angle
70°
Na
Na
Steering System - Pump
Piston, variable displacement
Na
Na
Steering System - Circuit
Pilot, load sensing
Na
Na
Steering
ISO 5010: 2007
Na
Na
Relief Valve Setting - Steering
4641 psi
Na
Na
Maximum Flow at 1,400 rpm
94.5 gal/min
Na
Na
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Na
Na
Brakes
ISO 3450: 2011
Na
Na