COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Skid Steer Loaders
236D3
ADD MODEL
ADD MODEL
Gross Power - SAE J1995
60 HP
Na
Na
Net Power - SAE 1349
72.1 HP
Na
Na
Displacement
203 in³
Na
Na
Stroke
4.7 in
Na
Na
Bore
3.7 in
Na
Na
Net Power - ISO 9249
72.8 HP
Na
Na
Peak Torque - 1,600 rpm - SAE J1995
195 ft·lbf
Na
Na
Net Power ISO 9249†
73.5 HP
Na
Na
Net Flywheel Power
72.1 HP
Na
Na
Net Power SAE 1349†
72.7 HP
Na
Na
Engine Model
Cat C3.3B DIT (turbo)
Na
Na
Rated Operating Capacity
1820 lb
Na
Na
Tipping Load
3600 lb
Na
Na
Breakout Force - Tilt Cylinder
5003 lb
Na
Na
Rated Operating Capacity with Optional Counterweight
2000 lb
Na
Na
Operating Weight
6552 lb
Na
Na
Wheel Base
43.5 in
Na
Na
Height - Top of Cab
82 in
Na
Na
Vehicle Width over Tires
66 in
Na
Na
Ground Clearance
7.7 in
Na
Na
Departure Angle
26°
Na
Na
Maximum Dump Angle
48°
Na
Na
Rack Back Angle - Maximum Height
91°
Na
Na
Bucket Pin Height - Carry Position
7.5 in
Na
Na
Clearance at Maximum Lift and Dump
92.9 in
Na
Na
Length - With Bucket on Ground
137.3 in
Na
Na
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Na
Na
Length - Without Bucket
108.9 in
Na
Na
Turning Radius from Center - Machine Rear
64.5 in
Na
Na
Turning Radius from Center - Coupler
51.8 in
Na
Na
Bumper Overhang - Behind Rear Axle
40.2 in
Na
Na
Maximum Reach - With Arms Parallel to Ground
53.3 in
Na
Na
Maximum Overall Height
156.6 in
Na
Na
Turning Radius from Center - Bucket
83 in
Na
Na
Bucket Pin Height - Maximum Lift
122.9 in
Na
Na
Reach - Maximum Lift/Dump
16 in
Na
Na
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39 HP
Na
Na
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
30 gal/min
Na
Na
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3335 psi
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Flow
20 gal/min
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Na
Na
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58 HP
Na
Na
ROPS
ISO 3471:2008
Na
Na
FOPS
ISO 3449:2005 Level I
Na
Na
Travel Speed - Forward or Reverse - Two Speed Option
10.6 mile/h
Na
Na
Travel Speed - Forward or Reverse - One Speed
7 mile/h
Na
Na
Chain Box - Each Side
2.3 gal (US)
Na
Na
Cooling System
3.7 gal (US)
Na
Na
Engine Crankcase
3 gal (US)
Na
Na
Fuel Tank
24.8 gal (US)
Na
Na
Hydraulic System
13.2 gal (US)
Na
Na
Hydraulic Tank
10.3 gal (US)
Na
Na
Note (2)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Na
Na
Note (1)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Na
Na
Inside Cab*
83 dB(A)
Na
Na
Outside Cab**
101 dB(A)
Na
Na
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Na
Na